Please refer to the list of states below to determine which SDS applies to your state:

WEST
California, Washington, Oregon, Arizona, Idaho, Nevada, Utah, Montana, Wyoming, Colorado, New Mexico, Alaska & Hawaii

LionGUARD Modified Bitumen Adhesive is a COLD-APPLIED, SBS POLYMER MODIFIED ASPHALT ADHESIVE, that provides great adhesive and elongation properties. LionGUARD Modified Bitumen Adhesive is available in brush and trowel grades.

USES
LionGUARD Brush-Grade is used to adhere to SBS modified bitumen membranes, base and ply sheets. LionGUARD Modified Bitumen Adhesive can also be utilized to adhere to conventional BUR ply sheets or fully granulated cap sheets.

LionGUARD Trowel-Grade can be used to make repairs on existing modified applications and flashings on vertical surfaces, i.e. skylights, vents, and pipes.

SPECIFICATION
ASTM D-3019 Type III

SURFACE PREPARATION
All surfaces should be free from oil, grease, dirt and lose materials. All BUR surfaces should be patched and repaired with LionGUARD 19 ULTRA Rubberized Flashing Cement and LionGUARD Glass Membrane. Metal surfaces must have all rust and scales removed.

ADVANTAGES
UL approved.
Excellent cure.
Tough, flexible, adhesive and cohesive film.
Excellent water and weather resistance.
Excellent general adhesive.
Excellent lap cement.
Good U.V. resistance.
Complies with current VOC regulations.
Elastomeric, moves with the substrate.

APPLICATION
Apply LionGUARD Modified Bitumen Adhesive at a rate of approximately 1 gallon per 100 square feet on horizontal and vertical surfaces; irregular surfaces may require slightly more material. LionGUARD Modified Bitumen Adhesive may be applied by squeegee, roller, brush or trowel.

COVERAGE RATE
Apply LionGUARD Modified Bitumen Adhesive at the rate of 1 gallon per 100 sq. ft.. On porous or irregular surfaces, 2 gallons per 100 sq. ft. may be required.

PHYSICAL PROPERTIES
Weight per Gallon: 8.65
Shear Strength: 18 lbs. / sq. in.
Peel Strength: 10 lbs./lin. in.
Elongation: 200%
Recovery: 80%
Cure Time: 24 to 48 hours @ 77F
Application Temperatures: 40F to 100F

CARE OF TOOLS
Equipment may be thoroughly cleaned after use with mineral spirits, taking the necessary precaution when handling combustible materials.

CAUTION
Do not use near an open flame. Avoid breathing solvent fumes and prolonged contact with skin. An excessive application may create blistering. Application at temperatures below 40F may take longer to cure. Do not take internally. If swallowed, do not induce vomiting. Call a physician immediately. Keep out of reach of children. Keep the container covered when not in use. Do not thin. Dispose of in an environmentally safe manner. Cover air intakes during application and while drying.

PACKAGING
Available in 5 gallon pails.

Attachment	Size
Data Sheet for West States	295.29 KB
SDS for West States	464.57 KB

PRODUCT DESCRIPTION
LionGUARD Modified Bitumen Adhesive Trowel Grade is a heavy mastic, modified SBS asphalt, asbestos-free, cold applied adhesive for use in adhering SBS modified bitumen membrane base and ply sheets as well as making repairs on existing modified bitumen applications. May also be used with conventional built-up ply sheets and granulated cap sheets. The unique qualities of this adhesive produce a bond of excellent strength. Meets ASTM D-3019 Type III.

ADVANTAGES

No need for torches or asphalt kettles
Produces a tough bond
Elastomeric film moves with membranes

INSTALLATION
All surfaces should be dry, clean and free from dirt, dust, oil, grease, and debris. For vertical applications and at seams and end-laps, apply in a 1/8 thickness (approximately 8 gallons per 100 square feet) using a serrated trowel. Apply adhesive in a uniform and continuous film to ensure even coverage. Allow adhesive to have an open time of 15 minutes before installing membranes.

CLEAN UP & STORAGE
Clean tools and equipment with mineral spirits or similar.

Attachment	Size
Data Sheet	104.66 KB
MSDS	65.45 KB

Please refer to the list of states below to determine which SDS applies to your state:

WEST
California, Washington, Oregon, Arizona, Idaho, Nevada, Utah, Montana, Wyoming, Colorado, New Mexico, Alaska & Hawaii

LionGUARD Flashing Cement is a carefully prepared, emergency roof cement with special water displacing characteristics, which ensures an effective bond to both wet and dry surfaces. The ability to adhere during inclement weather conditions makes LionGUARD Flashing Cement the first choice of both roofing contractors and plant engineers. LionGUARD Flashing Cement is composed of selected asphalts, mineral fillers combined with the refined solvent, and special chemical ingredients which give it a unique water displacement quality.

USES
LionGUARD Flashing Cement is a cold process, heavy bodied, trowel applied emergency roof cement ideal for repairing leaks in asphalt built-up roofs, flashing on walls, chimneys, skylights and vents, down-spouts and gutters. The dried film retains its flexibility and ductility so the coating will resist extreme variations in temperature and weather.

SPECIFICATION
ASTM D-4586 Type I
Federal Specification SS-C-153 Type I (AF)

SURFACE PREPARATION
All surfaces should be clean and free from oil, grease, rust, dirt, and other foreign matter. Excess water should be removed if possible before application of LionGUARD Flashing Cement.

APPLICATION
LionGUARD Flashing Cement is ready to use directly from the container. No heating is required. Spread LionGUARD Flashing Cement by trowel to an average thickness of 1/18" (8 gals. per square) or greater to all surfaces to be treated. To repair large cracks or breaks, spread LionGuard Flashing Cement over the damaged area, then embed LionGUARD Cotton, Glass or Poly-Mat membrane Reinforcement and re-apply another coat of LionGUARD Flashing Cement over the entire patch.

CARE OF TOOLS
Trowels and other equipment should be thoroughly cleaned with mineral spirits, taking necessary precautions when handling combustible materials.

CAUTION
Do not use near an open flame. Avoid breathing solvent fumes and prolonged contact with skin. Do not take internally. If swallowed, do not induce vomiting. Call a physician immediately. Keep out of reach of children. Keep the container covered when not in use. Do not thin. Dispose of in an environmentally safe manner.

PACKAGING
Available in 3 gallon and 5 gallon cans.

Attachment	Size
Data Sheet for West States	285.17 KB
SDS LG-9283 for West States	352.28 KB
SDS LG-0285 for West States	353.85 KB

Please refer to the list of states below to determine which SDS applies to your state:

WEST
California, Washington, Oregon, Arizona, Idaho, Nevada, Utah, Montana, Wyoming, Colorado, New Mexico, Alaska & Hawaii

LionGUARD Premium Fibered Aluminum Coating is made of selected asphalts and pigment flakes of pure aluminum, blended with petroleum solvents and mineral fibers. When LionGUARD Premium Fibered Aluminum Coating is applied to the roof, the aluminum flakes leaf to the surface, forming a reflective, metallic shield over the base material.

The advantages of this metallic aluminum shield are twofold:

The asphaltic oils in the base coating are protected from harmful intense rays of the sun by the reflective properties of the aluminum. Over 50% of the sun's rays are reflected by this aluminum shield, thereby preventing these oils from being "cooked" out of the base coating. The coating, therefore, retains its resilient characteristics and will not prematurely crack or dry out.During the hot summer months, LionGUARD Premium Fibered Aluminum Coating will help reduce indoor building temperatures and improve inside living and working conditions. LionGUARD Premium Fibered Aluminum Coating prevents the sun's rays from penetrating the roof coating and passing the heat into the building interior.

The combination of these protective materials-aluminum, asphalt and reinforcing fibers - by the exclusive LionGUARD process results in a self-protecting roof coating with longer-lasting moisture and heat resistant features. LionGUARD Premium Fibered Aluminum Coating remains tenaciously bonded to the base material, thus assuring longer roof life, with subsequent savings on roof maintenance.

SURFACE PREPARATION
All surfaces should be clean, dry and free of dust, dirt, oil and other foreign matter. Repair all cracks and blisters. New asphalt roof surfaces should weather a minimum of 90 days before being coated with LionGUARD Premium Fibered Aluminum Coating. However, LionGUARD Premium Fibered Aluminum Coating can be coated on roofs 5 to 7 days after LionGUARD asphalt emulsions have been applied.

APPLICATION
LionGUARD Premium Fibered Aluminum Coating should be spread uniformly over the roof surface. Care should be taken not to overwork the coating during application. This could have a damaging effect on the leafing of the aluminum. Pour the correct amount of aluminum coating to cover a given area and apply uniformly. Be sure to mechanically mix the aluminum coating thoroughly before using. LionGUARD Premium Fibered Aluminum Coating can be applied with a soft roof brush, roller or spray.

COVERAGE
Apply at the rate of 1 to 1.5 gallons per 100 sq.

CARE OF TOOLS
Tools and other equipment should be thoroughly cleaned after use with mineral spirits, taking the necessary precautions when handling combustible materials.

CAUTION
Do not use near open flame. Avoid breathing solvent fumes and prolonged contact with skin. Do not take internally. If swallowed, do not induce vomiting. Call a physician immediately. Keep out of reach of children. Keep container covered when not in use. Do not thin. Dispose of in an environmentally safe manner. Cover air intakes during application and while drying.

PACKAGING
Available in 5 gallon pails.

Attachment	Size
Data Sheet for West States	352.42 KB
SDS LG-2165 for West States	260.14 KB
SDS LG-2167 for West States	297.3 KB

Page 2 of 3

Find Our Pros in Your Neighborhood

NEMEON is a purchasing cooperative comprising over 100 independent roofing and siding distributors with more than 320 locations across North America. NEMEON members create strong, mutually beneficial, and sustainable partnerships with the industry's premier suppliers. These suppliers offer NEMEON members quality products, fair pricing, superior service, and a first-rate reputation. In turn, NEMEON members can provide the same exceptional customer service and pricing to local and regional roofing contractors, general contractors, project managers, and commercial developers across the United States. We are pros for pros.

Member Locator

THE COOPERATIVE ADVANTAGE: BUYING POWER & MUCH MORE

Support Locally Owned Businesses

A cooperative business belongs to the people who use it... people who have organized to provide themselves with the goods and services they need to succeed. Across America, 120 million people are solving problems and enjoying a better life because of their co-ops. People have formed 47,000 cooperatives for farming, banking, housing, childcare, health care, electric and telephone service, food retailing and other goods and services. They trust their co-ops to help them find solutions.

To achieve success in this jointly owned and democratically controlled enterprise, there is a basic set of principles that cooperatives practice. These are based on the values of self-help, self-responsibility, democracy, equality, equity, and solidarity. In the tradition of their founders, cooperative members believe in the ethical values of honesty, openness, social responsibility and caring for others.

A cooperative is one way for independent business owners - the backbone of Main Street USA - to prosper and effectively meet the challenge of chain stores and big box competition.

When you support a locally owned company:

Profits remain local and are invested in the community rather than foreign countries or different states. This re-investment benefits surrounding businesses and the community.
Local businesses support local charities, events, teams, churches, and organizations; owners, managers, and employees are integral to and contribute to the community because they are part of it.
Local businesses offer choices that chain or national companies don’t: they tailor their inventories and services to meet the specific needs of the local community which results in better service and quality to customers.
Independent businesses are owned by people who live in the community and are committed to investing in it. Local business owners are much more accessible than executives of large corporations.
Small local businesses are the largest employer nationally and, in the community, provide the most jobs to its residents.
Local businesses hire people who better understand the products they are selling and take more time to get to know customers.

QUARTERLY FEATURED MEMBER

Preferred Roofing Supply

In the highly competitive world of building supplies, one company in Atlanta is standing tall, not just for its products, but for its purpose. Meet Preferred Roofing Supply, a thriving, Latino-owned business serving the Atlanta metro area with three locations in Smyrna, Tucker, and Jonesboro.